QI-POWER-485 Single Phase AC / DC Energy Meter

Share:


QI-POWER-485 Single Phase AC / DC Energy Meter

QI-POWER-485

POWER /ENERGY METER SINGLE PHASE AC/DC TRMS - RS485 MODBUS

QI-POWER-485 is a Single-phase Power meter able to measure the TRMS AC/DC Current and Voltage. On the RS485 Modbus are available: Irms, Vrms, Watt, Var, Va, Vpk, Ipk, Frequency, Cosφ, Energy bidirectional and THD. The device is fully configurable by RS485, DIN rail mounting, 4kV galvanic isolation for Voltage input.


FEATURES

• AC / DC Energy Measurement Class 0.5; Bidirectional
• Measures Irms, Vrms, Watt, Var, Va, Vpk, Ipk, Frequency, Cosφ, Energy bidirectional & THD
• Configurable via RS485
• DIN rail mounting
• 4kV galvanic isolation,
• Industrial supply DC 9V ~ 30V
• RS485 Modbus


Strengths

• TRMS Measure, THD available;
• 0,5 % Accuracy;
• RS485 Modbus integrated;
• Bidirectional energy metering;
• DIN rail mounting in both side;
• OEM’S design, low cost;
• Fully configurable by free interface software FACILE QI-POWER-485;
• Bootloader for updating firmware;
• Available measure register: MSW first LSW first or hundredts.

 




QI-Power-RS485QI-POWER-485 Installation
 

APPLICATIONS

Photovoltaic:
AC / DC Power & Energy
Parallel String Voltage & Current monitoring.

Energy Management:
Direct comunication via RS485 Mobus to all Master Modbus devices.

 


 

FACILE QI-POWER-485

The free interface program FACILE QI-POWER-485 is the fastest way to configure the device. There is only one configuration screen (see picture shown). The changes made to the program act on the register of the QI-POWER-485-300, if you want to restore the default configuration, just press the button FACTORY DEFAULT.

TYPE OF MEASURE:
allows the selection of the measure RMS or DC only to define the sign, positive or negative, of reading.


SAVE ON ENERGY FLASH:
it is possible to activate the saving of the counters directly on the device’s flash memory .
 

REPORT OF TRANSFORMATION:
in case you would use the CT and / or VT, you can define the transformation ratio for the current input and voltage input, the default ratio is 1:1.
 

FILTER:
allows you to insert a filter on reading in order to get more speed in responding (value 1) or a more stable and accurate measurement (value 5 ), by default the value is set to 2. You can choose between intermediate values already set or manually enter the desired filter by choosing the CUSTOM option from the menu, in this case, you can set the following parameters: filtering in DC, filtering in AC (default value 5), Frequency measurament on Current channel.


MIN CURRENT THRESHOLD
(mA): Allow you to set the minimum current value (Cut off). Under this value the device measure Zero.


MIN POWER THRESHOLD (W):
Allow you to set the minimum power value (Cut off). Under this value the device measure Zero.


Energy Meter / Single Phase / Power / Qeed / USB / Power Meter / DIP Switch / Power Supply. QI-POWER-485 from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with version of the Singlephase Power meter QI-POWER-485, able to measure the RMS AC or DC Current and Voltage. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.



Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.



 Inquiry - QI-POWER-485 Single Phase AC / DC Energy Meter