Saturn Pyro Sdn Bhd
Johor Bahru Office
44 & 44A, Jalan Palma Rafis 1,
Taman Dato Chellam,
81800 Ulu Tiram,
Johor, Malaysia.

Shah Alam Office
K03-03-12, Tower 3,
UOA Business Park,
No 1, Jalan
Pengaturcara U1/51A,
Section U1, Kawasan
Perindustrian Temasya,
40150 Shah Alam,
Selangor, Malaysia.
Penang Office
Penthouse 1-21-1,
Suntech @ Penang Cybercity
Lintang Mayang Pasir 3,
11950 Bayan Baru,
Penang, Malaysia.

Bangalore Office
Saturnpyro Solutions Pvt. Ltd.

SFS-B-38, 1st Floor, 7th B Main Road,
Yelahanka New Town, Bangalore 560 064.
+91 829 192 0602
+601 7488 7001
India Office
Saturn Pyro India

3, Gr Floor, Eishita,
Shiv Vallabh Cross Road,
Ashokvan, Dahisar (E.),
Mumbai 400068.
+91 22284 84682
+91 98191 56654

SPC603 - Data Converter

Previous 2 / 5 Next

SPC603 - Data Converter Data Communication



▶SCADA Software Collects Data Over Ethernet
▶Browser Pages to Set Parameters
▶Reset Switch to Make Parameters to Default State
▶PoE to Avoid Separate DC Power Supply

About SPC603

SPC603 is an interface between RS232, RS485 or RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. It has multiple master access on a single Ethernet port. This allows upto 12 masters to access the same devices on the serial bus. It can be configured as TCP Server or TCP Client. The browser based configuration utility allows the host IP address and serial settings to be changed. The SPC603 module offers true IEEE 802.3afcompliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.


▶ 12 simultaneous MODBUS TCP masters and 32 simultaneous requests for each TCP master
▶ 10/100 Mbps Ethernet port
▶ Browser based configuration utility
▶ TCP MODBUS protocols
▶ Serial Interface : RS232, RS485, RS422
▶ TCP Server/Client
▶ Configurable baud rate, parity, stop bits, IP address, TCP MODBUS server port no
▶ 12-48 VDC power supply
▶ Default parameters: Can be restored by pressing reset switch at power ON
▶ Mounting : DIN Rail / Surface
▶ Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  

Switch to Mobile Version