RN1231 Intelligent Power Distribution Strips

Share:


RN1231 Intelligent Power Distribution Strips

General Description

RN1231 (Datasheet)


E3METER® intelligent power distribution strips (IPS) are the core element of our innovative monitoring system. They provide valuable data for both data center operators and clients: accurate energy consumption logging enables operators to offer usage based energy billing. A bright local display gives real-time feedback on power consumption which simplifies for example load balancing during commissioning of new equipment. Alarms make early detection of overload and other abnormal situations possible which helps to prevent power outages. Data transfers between E3METER® IPS and a central E3METER® Concentrator use reliable narrowband powerline communication  (PLC) technology which avoids the need for extra cabling. All measured values can be accessed via standard SNMP. Two dedicated extension ports can be used to measure temperature and humidity through E3METER® remote sensors.

Features

• Non-Intrusive voltage, current and frequency measurement through current transformer
• Energy and power measurements (active, reactive, apparent, power factor) per phase
• Neutral current measurement
• 1% accuracy
• Factory calibrated
• Alarms
• Internal temperature sensor
• 2x extension ports for external temperature/humidity sensors
• Data logging in E3METER® Concentrator
• Data access by 3rd-Party Tools via SNMP (through E3METER® Data Concentrator)
• Reliable Powerline Communication (Cenelec B, FCC or ARIB)
• 10/100 Mbps Fast Ethernet (HTTP, SNMP, Telnet, NTP)
• 36x C13, 6x C19 outlets  (other combinations on request)


Physical

Length  1670 mm (three phase)
Height  44 mm (1U)
Depth  51 mm
Weight  3 kg









 

AC Input

 Nominal Input Voltage  230 / 400 V rms
 Max. Input Current  16 A rms per phase
 Input Frequency  50 - 60 Hz
 Input Cable/Plug  2.5m (other lengths on request) CEE 16A 5p 6h








 

AC Output

 Nominal Input Voltage  230 / 400 V rms
 Max. Output Current  16 A rms per phase
 Output Connections  36 x C13 & 6 x C19
 Integrated Filter/Switch  No (optional on request)






 


 

Communication

 Powerline  Reliable narrowband Powerline Communication (Cenelec B, FCC or ARIB)
 Ethernet  10/100 Mbps Fast Ethernet, RJ-45 connector (HTTP, SNMP, Telnet, NTP)
 Serial  Console on left RJ12 connector, 115’200 bps, 8n1







 

Display

 Technology  TFT full graphical color display, 320x240
 Refresh Rate  1 Hz
 Screen Saver  Display turned-off automatically after 15 minutes







 

Sensors

 Internal  Temperature
 External  2 extension ports for temperature and humidity sensors






 

Measurements / Alarms

 Accuracy  [%]    1% (IEC 1036 Class 1)
 P  [W]    Real power per phase & total
 Q  [VAR]    Reactive power per phase & total
 S  [VA]    Apparent power per phase & total
 Ep  [kWh]    Real energy per phase & total
 Eq(C)  [kVARh]    Reactive energy (Capacitive) per phase & total
 Eq(L)  [kVARh]    Reactive energy (Inductive) per phase & total
 Urms  [V]    Line voltage per phase
 Irms  [A]  Alarm  Output current per phase, Neutral, total
 Upk  [V]  Alarm  Peak line voltage per phase
 f  [Hz]  Alarm  Line frequency per phase
 PF  N/A    Power factor per phase
 Ti, T1, T2  [°C]  Alarm  Internal temperature and values from external temperature sensors
 H1, H2  [%]    
 Humidity values from external sensors
 

























Intelligent Power Strip / Powerline Communication / 11kW / Zero-U  / PLC. Power Strip from SaturnPyro is the best available in Malaysia. Good performance and cost effective Power Meter with 18 x C13 sockets / 3 x C19 sockets. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.


Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai. 

 Inquiry - RN1231 Intelligent Power Distribution Strips