Charging Station for Electric Vehicles
Designed to be installed (both indoor and outdoor) at private houses, communal blocks, companies and other places where user authentication is not a requirement.
Concept DesignTaking into account that many times a domestic charger is considered an appliance, a nice design and a small size are key attributes that are to be contemplated. Furthermore WallBox eHome series offers other attributes such as low-cost, robustness, and user-friendly operation.
Product highlights• Compatible with BeON sensor (accessory), when combined with eHome is able to dynamically adjust the electric vehicle’s consumption according to the available power of the installation, avoiding the risk of blackout and/or having to upgrade the existing installation (resulting on a lower initial investment).
• The frontal LED bar not only informs the user about the charger status (e.g. operative, faulty…) but also EV charging status; charging (dynamic blue light) vs charged (static blue light).
• Its frontal key-locked door with electrical protections (optional) not only provides an easy access in case the protection has tripped but protects the user against electrical shock. It can also be used as a user authentication method (using the protection as a ON/OFF switch).
• The charger’s housing is made of ABS plastic which is both robust and UV resistant, providing protection against both mechanical stress and severe environmental conditions (which increases the charger lifespan and avoids its replacement in just a few years).
• Its well-thought-out shape allows the cable to be rolled up and keep it tidy and unbroken while the charger is not being used.
• Simple user operation by its Plug ‘n’ Charge mode that avoids the user obligation of authentication by means of an RFID card, phone or equivalent method.
• This series also includes a selector switch that facilitates the setup of the charger maximum output current (reducing installation time and cost).
• Remote charging activation is also offered by means of an ON/OFF external input signal (e.g. timer).
• WallBox eHome series provides a reserved space in case you want to have your own brand on it.
|Enclosure rating||IP54 / IK10|
|Operating temperature||-5 °C to +45 ºC|
|Ambient temperature storage||-40 ºC to +60 ºC|
|Operating humidity||5 % to 95 % Non-condensing|
|Light beacon||RGB colour indicator|
|Current setup||Onboard dipswitch|
|Dimensions (D x W x H)||115x180x315 mm|
|Cable length||5 meters|
|External input||Remote charging activation|
|Meter*||Active Energy Class 1 (IEC 62053-21)|
|Low temperature kit||-30 ºC to +45 ºC|
|Safety protection*||RCD Type A / B (30mA)|
|Power limit control||BeON sensor|
|Cable support||Metallic holder|
*When ordered, easy access with frontal key locked door
|AC power supply||1P + N + PE||1P + N + PE||1P + N + PE||1P + N + PE|
|AC voltage||230 VAC +/-10%||230 VAC +/-10%||230 VAC +/-10%||230 VAC +/-10%|
|Maximum current||16 A||32 A||16 A||32 A|
|Maximum power||3,7 kW||7,4 kW||3,7 kW||7,4 kW|
|Connection||Type 1 Cable||Type 1 Cable||Type 2 Cable||Type 2 Cable|
eHome BeON Compatible
eHome BeON takes a new step in domestic EV charging allowing you to charge your vehicle while using your appliancesThis intelligent sensor, easily added to the usual protection panel at home, dynamically adjusts electric vehicle’s consumption if the house system is about to be overloaded.
Vehicle Charger / Car Charger / Electronic / Charging Stations / Circontrol / Savings / . Circontrol Wallbox eHome EV Charging Module from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with 4-quadrant measurement (consumption and generation). Suitable for Medium or Low voltage installations, in both 3 or 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.
Pengecas Kenderaan / Pengecas Kereta / Elektronik / Stesen Pengecasan / Setec / Penjimatan /. Circontrol Wallbox eHome Charging Module dari Saturn Pyro adalah yang terbaik di Malaysia. Prestasi tinggi dan kos tenaga Tenaga Tenaga yang berkesan dengan pengukuran 4-kuadran (penggunaan dan generasi). Sesuai untuk pemasangan voltan sederhana atau rendah, dalam litar tiga fasa 3 atau 4-wayar, litar dua fasa dengan litar fasa tunggal atau ARON atau tanpa neutral neutral. Boleh didapati di Pulau Pinang, KL, Selangor, Johor, Sabah, Sarawak & di mana sahaja di Malaysia & Singapura.
Inquiry - WallBox eHome