Share:
PA3000 Smart Power Meter
A multi-function power meter with Ethernet access, power measurement, power quality analysis and power report generation
Product Description
PA3000 Brief
- PA3000 Smart power meter is designed for continue monitoring of middle to high voltage 3 phase systems
- Full power parameter measurement including: V, I, kW, pF, kWh, kVARh, Hz, Demand
- 0.5% revenue class accuracy
- Built-in Ethernet and field communication interfaces make it easily be integrated with different SCADA system
- Fully compatible with PM3000 to built up a high performance power management system with extremely low cost
Features
- Class 0.5 bi-directional energy and power parameter measure
- Block or Rolling power demand measurement
- Total and individual harmonics measure for 3 phase voltages and currents
- Time-stamped recording for alarm and sag/swell events
- Power usage daily and monthly report including: kWh, demand, peak THD, Max/Min V, Max/Min kW….
- Ethernet and RS-485 communication ports
- Support Modbus over TCP/IP (Ethernet), Modbus(RS-485), and DNP 3.0(RS-485) protocols
- Rich I/O including: 4 AI, 4 DI, 2 relay outputs
Specification
| Power parameters measure |
Current：3 phase, neutral, accuracy 0.1% Voltage：3 phase phase-phase, phase-neutral, accuracy 0.1% Frequency：50/60 Hz Total power：Active, reactive, apparent power, accuracy 0.5% Power per phase：Active, reactive, apparent power, accuracy 0.5% Power factor：Total, per phase |
| Energy measure |
Energy：Active, reactive, apparent energy, accuracy 0.5% Bi-directional energy：Deliver and receive kWh, kVARh, kVAh |
| Demand measure | Bi-directional Block/Rolling demand |
| Power Quality measure |
Harmonic：V, I THD and individual harmonics Sag/Swell：Configurable setting points |
| Report and event logging |
Report：Daily report : this day, yesterday Regular report : this period, last reset, Event logging：Sag, swell, alarm logging |
| Display and input/output |
Panel display：Mono 128 x 128 TFT-LCD Digital input：4 channel dry contact inputs Digital output：2 channel relay for alarm or kWh pulse output Analog output：4 channel 4~20 mA for V, I, kW, kVA, kVAR Voltage connection：10- 600 V Current connection：0~1A, or 0~5A Power supply：86~248 Vac or 100~300Vdc |
| Environmental & Physical |
Operation temperature：-10℃to 55℃ Storage temperature：-25℃ to 60℃ Humidity：20 to 80%RH (non-condensing) Dimensions：144mm(L) x 144mm(W) x 94mm(H) |
| Communication |
Primary port：RS-485 Modbus or DNP 3.0 protocol Secondary port：Ethernet : 10/100 Mbps, Modbus over TCP/IP protocol |
Panel Mounted / Energy Values / Circutor / Electric Parameters / Low Voltage / ARON Connection / Backlit LCD SCREEN / Multifunctional multimeter. PA3000 from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter which is suitable for Low Voltage installations, in both 3 and 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections.. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.
Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.
Inquiry - PA3000 Smart Power Meter
