Split Core CT (Bolt-On Type) SPD Series - 600/5A, Class 1

Share:


Split Core CT (Bolt-On Type) SPD Series - 600/5A, Class 1

Category: Bolt-On Type

Split Core CT (Bolt-On Type)

SPD Series - 600/5A, Class 1


The split core series current transformer has been specially designed to facilitate their installation in new or existing network. It can be installed without opening any cable or bus-bar circuit. The connection of conventional current transformers usually requires the interruption of the primary side circuit to pass cables or bus-bars through the transformer core. It can be easily opened and installed without any supply interruption thus save time and installation costs.

Application
§Energy metering & sub-metering
§Energy Management Systems
§Control & monitoring devices
§Energy saving devices

Specifications
§Rated Current: 600A
§Secondary Output: 5A or 1A
§Accuracy: 0.5% ~ 1% from 10% to 150% of full scale range
§Rated test voltage: 3kV AC (1minute)
§Rated short-time thermal current: 60In
§Rated dynamic current, (Idyn): 2.5Ith
§Rated voltage, (Vm): 0.72kV AC
§Operating temperature: -10deg C ~ 50deg C
§Housing rating: UL 94V0
§Safety factor: FS 5

Split Core CT Dimension

Model Outer Dimension (mm) Window Size (mm) Installation Size (mm) CT Ratio Burden
L W H a e M N
SPD-XH-30x20 90 40 110 20 30 49 52 100/5 ~400/5 1VA ~ 2.5VA
SPD-XH-80x50 115 37 156 50 80 81 50 250/5 ~ 1000/5 1.5VA ~ 5VA
SPD-XH-80x80 145 37 159 80 80 111 45 250/5 ~ 1000/5 1.5VA ~ 5VA
SPD-XH-120x80 145 37 200 80 120 111 45 500/5 ~ 1500/5 2.5VA ~ 7.5VA
SPD-XH-160x80 185 53 248 80 160 118 45 1000/5 ~ 3000/5 10VA ~ 15VA

SPD Series Split Core CT



High accuracy, yet very cost effective industrial split-core and bolt-on current transformers supplier in Malaysia & Singapore. Available in Penang, KL, Selangor, Johor & anywhere in Malaysia & Singapore.

Available in Penang, KL, Selangor, Johor & anywhere in Malaysia & Singapore.


Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.

 Inquiry - Split Core CT (Bolt-On Type) SPD Series - 600/5A, Class 1

Fill out the form below and we'll be in touch soon.